RYHK-FC  Automatic Die Cutting Machine with Stripping
The RYHK series Automatic Die-cutting & Creasing Machine with Stripping (Lead Edge Feeder)  can efficiently complete the die cutting and embossing of products, as well as maintaining the highest precision and product quality. The RYHK series Automatic Die-cutting & Creasing Machine with Stripping (Lead Edge Feeder) is well equipped and almost can adapt to all die cutting requirements of products.

(1) Adopt nodular cast iron-QT500-7, the mainframe wallboard casting by special technology process, thus featuring by high strength, never deformation and ensure the safety of the mainframe wallboard.

(2) Adopt Taiwan-imported intermittent mechanism to ensure that the machine operates accurately. Also, the main engine is equipped with overload protection device and torque limit clutch, to ensure that when they being impacted by external force can stops immediately to reduce the damage to the machine body and teeth precision and reduce the occurrence of failure rate.

(3) The whole machine all uses SKF\NSK imported original bearing.

(4) The whole machine uses original parts imported from France Schneider, Japanese OMRON.

(5) Key parts of gripper bars are imported from Japan.

(6) The craft shaft is adopts Germany Ni-Cr-Mo metal steel, with high precision and will never deforms.

(7) Use the centerline positioning system to realize fast plate changing of worksheet.

(8) Equip with touch-screen operation interface in both Chinese and English.

(9) All adopt Taiwan AIRTAC pneumatic components to ensure every pneumatic action performs accurately.

(10) Escalator delivery fork with non-stop air cylinder for neat and positive delivery and conveyor belt delivery table to protect the sheets from scratches;

(11) The side gauge adopts photoelectric system.

(12) Automatic force lubrication system recycles fluid

(13) The oil pump adopts automatic cooling fan device.

(14) Main motor from Siemens, ensure stable operation.

 

Features

  • CE approved
  • Center line system
  • Front waste separator
  • Non-stop delivery system
  • Human machine interface
  • Timing belt main drive
  • Overloading protection torque limit clutch
  • Automatic central lubrication system has been adopted to faclitate easier maintenance
  • Wide stock range for corrugated board
  • Photoelectrical device for safe operation
  • High speed and precision lead edge feeder equipped
  • ISO9001 and CE approved manufacturing process.
  • European, Taiwan and Japanese standard spare parts

    Workshop

     

    RYHK-1300

    RYHK-1500

    RYHK-1650

    RYHK-1900

    Maximum sheet size (mm)

    1290*940

    1500*1100

    1650*1200

    1900*1400

    Minimum sheet size (mm)

    550*450

    550*450

    650*450

    650*450

    Maximum cutting size (mm)

    1280*920

    1480*1080

    1620*1180

    1870*1380

    Inner chase size (mm)

    1310*970

    1520*1130

    1650*1230

    1900*1430

    Maximum cutting pressure

    400 Tons

    400 Tons

    400 Tons

    400 Tons

    Stock range

    B, E, C, A Flue and double wall

    or corrugated board up to 8.5mm

    Min. Gripper waste

    12mm

    12mm

    12mm

    12mm

    Min. Gripper margin

    6-12mm

    6-12mm

    6-12mm

    6-12mm

    Cutting rule height

    23.8mm

    23.8mm

    23.8mm

    23.8mm

    Maximum speed

    6000 s/h

    6000 s/h

    6000 s/h

    5500 s/h

    Max. Die-cutting pressure

    400tons

    400tons

    400tons

    450tons

    Total power

    25 KW

    30 KW

    38 KW

    38 KW

    Power supply

    380V, 50HZ, 3PH

    Mobile lower platen adjusting range

    ±1.5mm

    ±1.5mm

    ±1.5mm

    ±1.5mm

    minimum front waste

    12mm

    12mm

    12mm

    12mm

    Net Weight

    20/21 Tons

    23/24 Tons

    34/35 Tons

    37/38 Tons