RYSF-290S Corrugated Single Facer Machine

 

 

Structural features:

The use of suction hood structure, with high - pressure strong fan. The air suction is equipped with sound attenuation device, and the air source and electrical control are concentrated in the same operating cabinet. The distance from the main machine is not less than 1.5m.

The operating side is fully closed and covered. Machine base and wallboard cast iron structure, wallboard thickness of 130mm. Universal joint drive.

The corrugated roller material is made of 48 CrMo alloy steel, after tempering, medium frequency quenching, surface polishing, corrugated roller diameter ¢293 mm, surface hardness above HRC60 degrees (optional, tungsten carbide roll and surface hardness HV1200). Key parts of the tile roller, pressure roller bearings using wafangdian high temperature bearings.

The pressure roller ¢320 mm, surface grinding and chrome plated treatment; The cylinder is controlled to move up and down, and the material is medium carbon steel no.45, tempering and tempering treatment (with buffer device).

The pneumatic control to glue back glue, glue spreader with 25 215 mm diameter surface after polishing line after pit type checker processing hard chromium plating processing, scraping the rubber roller surface after grinding hard chromium plating processing.

Raw materials of corrugated roller and pressure roller are provided by zhongyuan special steel co., LTD. The corrugated roller has a top middle height of 0.15mm on one side and a middle height of 0.075mm on the other side. Add limit device.

The preheat roll ¢diameter of 600 mm.

General technical parameters:

1.Working width:1000-2200mm

2. Operation direction: left or right (according to the customer's workshop)

3, the design speed: 120 m/min, temperature range: 200-260

4, corrugated (UV or UVV) :

Roller diameter parameters:

1, corrugated roller diameter: 2 293 mm diameter, pressure roller, 320 mm

3, glue roller diameter: 4 215 mm, preheater diameter: 600 mm

Power motor parameters:

1. Main drive motor: 11KW rated voltage: 380V 50Hz continuous (S1) working system

2, suction motor :11KW rated voltage: 380V 50Hz continuous (S1) working system

Product center

RYSF-290S Corrugated Single Facer Machine

Contact

Our Office in Lebanon: 
BLUEBERRY consulting & trade s.a.r.l   

 


1453 Antelias main road – CCI Bldg. P.O.Box 

70-424 North Metn BEIRUT – LEBANON


 

Att. Jamal Nasr
 

Tel: +9614522347 

ROYAL PACKING is professional producer for Corrugated paperboard production machines, the main products include: 2-layer, 3-layer, 5-layer, 7-layer Corrugated paperboard production line, single facer line, single facer, Roll stand, Pre-heater, Gluer machine, triple preheater, double facer, NC Cutter, Slitter Scorer, stacker, gantry stacker, basket stacker and so on.
Collect