Paper Width

Gross width 860mm, net width 845mm

Cutting numbers

4 cutting-A4 210mm (width)  

Paper roll’s diameter

Max.Ф1500mm.  Min.Ф600mm

Paper core’s diameter

3”(76.2mm)or 6”(152.4mm) or according to the clients’ demand

Packing Paper grade

High-grade copy paper; High-grade office paper; High grade Free Wood paper etc.

Paper weight

60-100g/m2

Sheet length

297mm ( specially design for A4 paper, the cutting length is 297mm)

Ream amount

500 sheets Max. Height: 45-55mm

Production speed

Max 0-250m/min(depends on different paper quality)

Max. Numbers of cutting

Max 670/min

Output of the ream

Max 30-34 reams/min

Load of cutting

500g/m2 (5×100g/m2)

Cutting accuracy

±0.2mm

Cutting condition

No variation of the speed, no break, cut all the paper at one time and need the eligible paper.

Power

34KW

Air consumption

300NL/min

Air pressure

6 bar

Edge cutting

2×10mm

Safety standard   

Design  according the safety standard of China

1) Machine Type  

Each machine table can take 2 sets of shaftless paper rack.

2) Diameter of the paper roll

Max. Ф1500mm

3) Width of the paper roll  

Max. Ф860mm

4) Paper rack’s material  

Steel

5) Clutch device

Pneumatic Braker and control

6) Clip arm’s adjustment

Manual adjust by oil pressure

7) Paper core demanding

3”(76.2mm)or 6”(152.4mm) or according to the client’s need

1) When the paper through inductor, that automatic feedback to the PLC control system to increase brake load, increase or reduce the tension that control the paper tension automatically.

1) Upper and lower knives are rotary make the cutting accuracy is very precision.

2) Anti-curve device Include one set of square bar and steel wheel. When the curve paper through paper edge unit that canadjust the paper square and let it flat.

3) 5 sets slitting knives

Upper slitting knife take by air pressure and spring. Lower knife connect with bear drive(the diameter is Ф180mm ) and move with spring. The upper and lower round knife is made by SKH.The lower slitting knife (diameter is Ф200mm) and drive with in-phase belts. The lower slitting knife is 5 groups, each group have two knife edge.

4) Paper feeding Wheel

Upper wheel

Ф200*900mm (rubber covered)

Lower wheel

Ф400*1000mm (anti-glide)

5) Cutting knife group

Upper cutting knife    

2 sets 1100mm

Lower cutting knife

2 sets 1100mm

6) Driving group(High precision bear and belt drive)

7) Main driving motor group: 22KW

1) Transporting by level and overlapping device

2) High speed transporting belt and press wheel. Upper and lower transport belt corresponding pressure paper, automatic tension and close system.

3) Static removal device(Include static removal bar and Negative  ion generator)

1) Automatic device for paper stack up and down

2) Jogging device and clap paper tidy. Control by air vat, when design sheet, the cylinder up and down by cut paper bar. After transport paper to belt, transport to the pack table cross.

Paper Width

Gross width:310mm; net width :297mm

Ream packing high

Max 55mm; Min 45mm

Packing roll dia

Max.1000 mm; Min.200mm

Packing roll width

560mm

Packing sheets weight

80-120g/m2

Packing sheets grade

high-grade copy paper, high-grade office paper, high-grade offset paper etc.

Design speed

Max 50 reams/min

Operation Speed

Max 35 reams/min

Packing condition

no speed variations, no breaks, cut all the paper at one time and qualified packing paper.

Driving

AC Servo Precision Control

Power

18KW

Compressing air

consumption

300NL/min

Air pressure

6bar