Automatic Paper Crosscutting Machine

Introduction:

This machine is specialist for horizontal and vertical cutting paper rolling materials to A4, A3, A2 size etc. it can be with 1 roll, or 2rolls, or 4 rolls etc

More details

Automatic Paper Cross cutting Machine

Introduction:

This machine is specialist for horizontal and vertical cutting paper rolling materials to A4, A3, A2 size etc. it can be with 1 roll, or 2rolls, or 4 rolls etc

Main Technical Parameters

3.Performance and Characteristics：

50. ►Adopts pneumatic automatic materials loading system with much easy operation and convenience
50. ►Adopts down-up recurrent cutting with orderly finished products and without water                                caltrop; meantime, it can be used for horizontal cutting and vertical cutting at one time
50. ►It adopts servo motor for controlling constant-length cutting.
50. ►It adopts PLC control, contact screen operation
50. ►It adopts pneumatic, displacement sensor for controlling transmission system, with photoelectric,        gas together, it has the function of easy operation, high precision, good stability, low noise.
50. ►This machine has the function of the frequency converter timing device, automatic counting, stop        working by alarm ,magnetic powder tension control, can be vertically, adopt blower fan to get rid of      waste
50. ►It has the functions of high-precision of cutting, high speed,etc . pneumatic structure combined with      computer control be adopted for transmission section ,making it become much more steady                operation
50. ►It has the function of automatic stacking which is in order . Photoelectric auto tracing subtense            system

Main Specification

Unwinding unit 

1. 1）Machine shelf adopts cast quality steel plate
2. 2）Adopts air pressure automatic lifting function
3. 3）Lifting adopts 150 model double cylinder start
4. 4）Magnetic powder tension control system
5. 5）Control type ：Use potentiometer control
6. 6）Tension control scope: 3-50kg
7. 7）Tension magnetic powder use 10kg controller     
8. 8）Material pulling rolls adopts air shaft type
9. 9）Transmission guide roll: aluminum guide roll by active balance treatment
10. 10）Material can be adjustable right and left
11. 11）Control type：Pneumatic control
12. 12）Error correction motor adopts 130 model sychronization motor drive
13. 13）Photo electric for error-correction (precision+-0.2mm) Sensor made in Taiwan
14.                      

15. EPC System

    Edge position correction system

16.                                

     

    Traction device:

17. 1）Structure style: active traction and passive press fasten style
18. 2）Based seat is casting structure  
19. 3）Traction roller is rubber roller
20. 4）Press fasten style: controlled by pneumatic
21. 5）Press fasten cylinder
22. 6）Transmission guide roller: aluminum guide roller
23. 7）Traction motor adopts servo motor,Drive in-phase fix the length   

24. 8）Length can be adjustable by PLC

25.  

                         

     

    Material delivery structure:

26. 1）Adopt motor and shift gears combination ways
27. 2）Main motor: speed adjusted by transducer
28. 3）Transducer: VT Brand
29. 4）Drive style: drove by main motor and traction through active roller
30. 5）Transmission: adopts triangle belt and belt wheel together structure
31. 6）Material-delivery: adopts floating backrest structure for buffer action to keep material
32. 7）Floating upper and lower tension adopts pneumatic traction Cylinder
33. 8）Floating guide roller: adopts aluminum guide roller

34. 9）Whole material-delivery structure will be controlled by displacement sensor

35.  

                                

     

    Blowing waste paper device
36.                  

     

    Cutting Unit

37. 1）Cutting style: fix well the lower cutter and cut actively by upper cutter
38. 2）Cutter holder: adopts casting heavy style structure
39. 3）Slip bearing
40. 4）Fount 
41. 5）Lubricating oil can be recycled using
42. 6）Both upper and lower cutters adopts bar style imported balance silic steel cutter
43. 7）Cutting blade
44. 8）Cutter position can be adjustable by hand
45. 9）Active transmission style: main motor transmission equipped with derailleur enable centrifugal 10）wheel joined with connecting pole to run cutter reciprocating
46. 11）Main motor: by transducer speed adjusting 
47. 12）Transducer: Edison brand
48. 13）Transmission: adopts gear wheel and chain wheel together structure
49. 14）Centrifugal wheel

50. 15）Connecting pole

                            

     

    Slitting Unit

51. 1）Slitting way: Bottom blade initiative, drive upper balder to slit.
52. 2）Adopts round cutters
53. 3）Upper cutter shaft adopts steel shaft
54. 4）Upper round cutters is made form shanghai Shenlong group
55. 5）Bottom cutter shaft adopts steel shaft
56. 6）Bottom round cutter adopts shanghai shenlong cutter

57. 7）Slitting precision : ±0.2mm

                          

     

    Collection device：

58. 1）Automatic meter counting and stop
59. 2）Automatic delivery when reach the numbers setup in PLC

60. 3）Delivery table with belt and divide system

                             

Electrical control part：（connect with main machine）

1. 1）Control system: Main machine control, tension control, adjusting control
2. 2）Main machine control：Main motor control, traction control, material delivery control, cutting control (touch screen is PANASONIC PLC control)
3. 3）Tension control ：Unwind tension, the speed of control scope is wide, good performance whatever the speed
4. 4）Electrical meter counting, alarm stop, auto length-position functions Above electrical components is Delixi brand in China.

All the switches are made in “Schneider” Germany