Paper Roll Cutting Machine

Introduction:

ROYAL PACKING is professional producer for This paper roll cutting machine which is suit for cutting big rolling packaging materials such as paper, PVC, PET film paper plastic, multicolor laminated material, etc. It adopts servo motor(or step motor)

More Details: 

RYQJ-D PLC High Precision Paper roll Cross-cutting Machine

The machine with one roll with manual stacker

( slitting knife)

Introduction:

This machine is suit for cutting big rolling packaging materials such as paper, PVC, PET film paper plastic, multicolor laminated material, etc.

It adopts servo motor(or step motor)

Main Technical Parameters

Performance and Characteristics:

50. • Adopts pneumatic automatic materials loading system with much easy operation and convenience
50. • Adopts down-up recurrent cutting with orderly finished products and without water                                caltrop; meantime, it can be used for horizontal cutting and vertical cutting at one time
50. • It adopts servo motor for controlling constant-length cutting.
50. • It adopts computer control, contact screen operation
50. • It adopts pneumatic, displacement sensor for controlling transmission system, with photoelectric,        gas together, it has the function of easy operation, high precision, good stability, low noise.
50. • This machine has the function of the frequency converter timing device, automatic counting, stop        working by alarm ,magnetic powder tension control, can be vertically, adopt blower fan to get rid of      waste
50. • It has the functions of high-precision of cutting, high speed,etc . pneumatic structure combined with   computer control be adopted for transmission section ,making it become much more steady operation
50. • It has the function of automatic stacking which is in order . Photoelectric auto tracing subtense            system

1.Unwinding unit 

1. （1）Machine shelf adopts cast quality steel plate
2. （2）Adopts airpressure automatic lifting function
3. （3）Lifting adopts 150 model double cylinder start
4. （4）Magnetic powder tension control system (1set)
5. （5）Control type : Use potentiometer control
6. （6）Tension control scope : 3-50kg
7. （7）Tension magnetic powder use 10kg controller     (1set)
8. （8）Material pulling rolls adopts air shaft type  
9. （9）Transmission guid roll: aluminum guide roll by active balance treatment(3 unit φ70×1150mm)
10. （10）Material can be adjustable righ and left
11. （11）Control type: Pneumatic control
12. （12）Error correction motor adopts 130 model sychronization motor drive
13. （13）Photo electric for error-correction (pecision+-0.2mm) Sensor made in Taiwan

2.Main machine part

1. （1）Shaft :Trough steel and high quality steel plate structure in 10mm thickness
2. （2）Trough beam style stell:  

3.Traction device:

1. （1）Strcuture style: active traction and passive press fasten style
2. （2）Based seat is casting structure  ( 1set)
3. （3）Traction roller is rubber roller
4. （4）Press fasten styple: controlled by pneumatic
5. （5）Press fasten cylinder: 
6. （6）Transmission guide roller: aluminum guide roller 
7. （7）Traction motor adopts servo motor 2.6kw,Drive in-phase fix the length   
8. （8）Length can be adjustble by computer

4 . Material delivery structure:

1. （1）Adopt motor and shift gears combination ways
2. （2）Main motor: speed adjusted by transducer
3. （3）Transducer: Edison brand
4. （4）Drive style: drove by main motor and traction through active roller
5. （5）Transmission: adopts triangle belt and belt wheel together structure
6. （6）Material-delivery: adopts floating backrest structure for buffer action to keep material
7. （7）Floating upper and lower tension adopts pneumatic traction Cylinder specification:  
8. （8）Floating guide roller: adopts aluminum guide roller 
9. （9）Whole material-delivery structure will be controlled by displacement sensor

5 . Cutting Unit

1. （1）Cutting style: fix well the lower01cutter and cut actively by upper cutter
2. （2）Cutter holder: adopts casting heavy style structure
3. （3）Slip bearing 
4. （4）Fount  
5. （5）Lubricating oil can be recycled using
6. （6）Both upper and lower cutters adopts bar style imported balance silicic steel cutter
7. （7）Cutting blade  
8. （8）Cutter position can be adjutable by hand
9. （9）Active transmission style: main motor transmission equipped with derailleur enable centrifugal             wheel joined with connecting pole to run cutter reciprocating
10. （10）Main motor: by transducer speed adjusting (1unit)
11. （11）Transducer:  
12. （12）Transmission: adopts gear wheel and chain wheel together structure
13. （13）Centrifugal wheel(2unit)
14. （14）Connecting pole (2unit)

6 . Slitting Unit

15. （1）Slitting way: Bottom blade initiative, drive upper balde to slit.
16. （2）Adopts round cutters
17. （3）Upper cutter shaft adopts steel shaft
18. （4）Upper round cutters is made form shanghai Shenlong group Bottom cutter shaft adopts steel                shaft  
19. （5）Bottom round cutter adopts shanghai shenlong cutter  
20. （6） Slitting precision : ±0.2mm

6.Electical control part: (connect with main machine)

1. （1）Control system: Main machine control, tension control, adjusting control
2. （2）Main machine control: Main motor control, traction control, material delivery control, cutting                   control
3. （3）Tension control : Unwind tension, the speed of control scope is wide, good performance                        whatever the speed
4. （4）Electrical meter counting, alrarm stop, auto length-position functions Above electrical                           components is Delixi brand in China. 
5. （5）All the switches are made in “schneider” Germany

7.Delivery device:

1. （1）Automatic meter counting and stop
2. （2）Automatic delivery when reach the numbers setup in PLC(delivery motor is 1.5kw)
3. （3）Delivery table with belt(1000mm)

8.Other condition:

4. （1）Power supply : Three phases four lines air siwitch, 380V / 50Hz (can be made according to                 users
5. （2）Air source: Max 5.5kg/cm2×5m3/min

More Photos:

 Note: Machine have updated in 2018, is much more stability and better quality and more competitive price.