3-Layer Corrugated Paperboard Production Line
Introduction:
ROYAL PACKING is professional producer for Corrugated cardboard production line in China. We can produce the 3 ply, 5 ply and 7 ply corrugated cardboard production line, Widths from 1000 to 2500mm, production speeds from 60 to 250 meters/min. We can offer reasonable project to meet customers’ requirements.
More Details:
Main Equipment List
Equipments Name |
MJT-80-1800 Economical |
MJT-120-1800 Standard |
MJT-150-1800 High-speed |
Mechanical Roll Stand (include the paper roll rail.) |
3 |
|
|
Hydraulic Roll Stand (include the paper roll rail.) |
|
3 |
3 |
Pre-heater Ф600mm |
1 |
|
|
Pre-heater Ф800mm (Ground) |
|
2 |
2 |
Vacuum Single Facer (RollФ280), gimbal drive |
1 |
|
|
Vacuum Single Facer (RollФ320), gimbal drive |
|
1 |
1 |
Transport Bridge (Electrical adjust the precision, vacuum tighten and loosen.) |
1 |
|
|
Heavy model transport bridge (Electrical adjust the precision, vacuum tighten and loosen.) |
|
1 |
1 |
Double preheater Ф600mm |
1 |
|
|
Double preheater Ф800mm |
|
1 |
1 |
Double Gluer - A |
1 |
|
|
Double Gluer - B |
|
1 |
1 |
Double baker (600mm X12heat plates, 4.5meter cooling part.) |
1 |
|
|
Double baker (600mm X14heat plates, 5meter cooling part.) |
|
1 |
|
Double baker (600mm X16heat plates, 6meter cooling part.) |
|
|
1 |
Thin Blade (Simple electrical adjust.) |
1 |
|
|
NC Thin Blade |
|
1 |
1 |
NC Cutter |
1 |
1 |
1 |
Conveyor and Stacker |
1 |
1 |
1 |
Glue system |
1 |
1 |
1 |
Steam system |
1 |
1 |
1 |
Main Technical Parameters
Technological Parameters |
MJT-80-1800 Economical model |
MJT-120-1800 Standard model |
MJT-150-1800 High-Speed |
Steam cost |
0.8~1.2Mpa About 2T/h |
0.8~1.2Mpa About 2T/h |
0.8~1.2Mpa About 2T/h |
Starch Cost (g/m2) |
11-13 |
11-13 |
11-13 |
Raw paper width (mm) |
1800 |
1800 |
1800 |
Mechanical Speed |
100m/min |
150m/min |
180m/min |
Economical speed |
80m/min |
120m/min |
150m/min |
Workers |
6-9 |
6-9 |
6-9 |
Note: Above parameters are for your reference. It depends on the different machines you choose.
※ Hydraulic shaftless mill roll stand
※Structural feature:
★adopt hydraulic drive to complete the paper clamping, loosen, remove for the medium, translation left and right and others,the lifting of the paper adopts hydraulic drive.
★brake adjustable adopts multipoint braking system.
★every stand matched two sets paper car , and they can paper on the both sides at the same time.
※Technical parameters:
1. The range of clamping paper: MAX1600mm MIN800mm
2. Clamping diameters: MAX¢1500mm MIN¢350mm
3. Main shaft diameter of paper holder: ¢242mm
4. Gas source work pressure(Mpa): 0.4---0.8Mpa
※Hydraulic system parameters:
- Work pressure (Mpa):16---18Mpa
- Lifting hydraulic cylinder: ¢100×440mm
- Clamping hydraulic cylinder: ¢63×1300m
- Hydraulic station motor power: 3KW --380V -- 50Hz
- Solenoid valve voltage: 220V 50 Hz
※Mainly purchased parts, raw materials and origin:
Name of main parts |
Brands or place of origin |
Material |
Main shaft |
Day steel production |
Diameter 242mm |
Swing arm |
Production by own |
Resin sand gray ironHT200 |
wallboard |
Jigang prduction |
Q235AWelding parts |
bearing |
HRB,ZWZ,LYC |
|
expand chuck |
Zhejiang xusheng |
3, 4inch shared |
Main electrical appliance |
France Schneider |
|
button |
CHINT NP2series |
|
Air switch |
French Schneider |
|
Pneumatic components |
Zhejiang Sonor CSM |
|
Hydraulic station |
Shandong zaozhuang |
|
Brake pump |
zhejiang |
|
-
Corrugated Paperboard Production Line
-
Single Facer Line
-
Flexo Printing Machine
-
Folder Gluer Machine
-
Flute Laminating Machine
-
Flat Die-Cutting Machine
-
Rotary Die-Cutting Machine
-
Carton Stitcher Machine
-
Paperboard Waste Baler Machine
-
Paperboard Stripping Machine
-
Single Facer Machine
-
Slitter Scorer
-
NC Cutter
-
Paper Roll Stand
-
Paperboard Stacker
-
Flexo Printing Plate Making Machine
-
Die-Cutting Mould Making Machine
-
Other Machines and Spare parts
-
Paper Roll Cutter
-
Window Patching Machine
-
Embossing machine
-
Slitting and Rewinding Machine
-
Paper Box Making machine
-
Digital Printing Machine